Otomasyon Çözümlerimiz | Teknoplan Mühendislik

“Teknoplan achieves quality with minimal cost.”

Automation

Cut to Length Control Systems

Excentric Rotary Knife

  • It can cut 160 pieces per minutes.
  • Line speed is 75 m/min for 2000 mm
  • Line speed is 80 m/min for under 500 mm
  • It is programmed with Simotion D425.
  • Part of stack is made with servo motors.
  • Closed-loop is made with torque control system in coil opener.
  • 0,40-3 mm cold rolled sheet material can be cut.

 We have excentric rotary knife  made for 10 mm thick, 2000 mm wide warm material.

Cross-Cutter Rotary Knife

  •  0,40-3 mm cold rolled sheet material can be cut.
  •  Line speed is 90 m/min for 1000mm lenght.
  •  It is programmed Simotion D425.
  •  Part of stack is made with servo motors.
  • Closed-loop is made with torque control system in coil opener.

Slitting Line Control Systems

We have automation system on domestic and abroad. You can examine slitting line that can reach speeds of 500 m per minute from our videos.

PLC Training Kits

  • It is designed with s7 1200 PLC and touch screen.
  • PLC processor and HMI are replaced optionally.
  • Training kit have digital I/O and anolog I/O.
  • It is sufficient for mid-range system automations.
  • Both PLC and HMI are designed on same environment by TIA-Portal software.

Teknoplan © Copyright 2013

Kdz. Ereğli OSB, 4 Nolu Yol Sokak No: 12, Kdz.Ereğli/Zonguldak

0372 – 312 18 60 | 0372 – 312 18 73

teknoplan@teknoplan.com.tr